A Complete Guide with RUBENA TYRES
When I decided to switch to a tubeless system, I had no idea how much it would change my riding experience.
Fewer punctures, better grip, smoother rides over rough terrain. These are all benefits I used to only imagine.
Now I know that tubeless isn’t just a passing trend; it’s the new standard every cyclist should consider.
And if you’re looking for a reliable partner to make the switch easier, RUBENA TYRES is here to help.
What Is Tubeless and Why Consider It?
A tubeless system (TRL) means the tyre doesn’t use a traditional inner tube.
Instead, the air is sealed by a special liquid sealant — the so-called “tubeless milk” — which can automatically close small punctures as you ride.
Main Advantages:
- Fewer punctures – the sealant works both preventively and as an instant repair.
- Lower tyre pressure – for improved grip, comfort, and control.
- Reduced weight – no tube means saving a few grams and a bit of energy.
- Better rolling resistance – the tyre adapts more naturally to the terrain.
- Smoother ride – ideal for technical trails, forest paths, and gravel routes.
Tubeless-ready tyres from RUBENA TYRES are designed for easy installation, even at home without the need for special equipment.
Is Tubeless Right for You?
Consider switching if at least one of the following applies to you:
- You often ride off-road, on gravel, or forest trails.
- You’re tired of dealing with multiple punctures every season.
- You want better traction, comfort, and confidence in corners.
If YES, the tubeless system can truly transform your riding experience.
RUBENA TYRES offers tubeless-ready tyres for MTB, gravel, and road bikes, including models suitable for e-bikes.
What You’ll need for the Conversion
Switching to a tubeless setup is quite straightforward but requires the right components and a bit of patience the first time around.
Basic Equipment:
- Tubeless-ready tyres – e.g. Rubena SCYLLA, KRATOS, FALCON, or X-ROAD
- Compatible rims – ideally labeled TLR (Tubeless Ready)
- Sealing tape – to seal spoke holes and the rim bed
- Tubeless valves – with removable cores for easy sealant refilling
- Sealant – 60–100 ml per wheel (road: 30–40 ml, gravel: 50–70 ml, MTB: 80–100 ml)
- High-flow pump or compressor – for initial inflation
💡 Tip: Top up the sealant every 2–3 months to maintain airtightness.
Step-by-Step Installation
- Prepare the rim – clean it and apply sealing tape in one continuous strip.
- Install the valve – insert it into the valve hole and hand-tighten the locknut.
- Mount the tyre – fit one bead first, then the other.
- Add the sealant – pour in the recommended amount based on tyre width.
- Inflate – ideally using a compressor so the beads “pop” into place.
- Spin the wheel – this spreads the sealant evenly and seals micro-leaks.
💡 If the tyre doesn’t seat properly, a bit of soapy water can help improve slip and sealing.
Tubeless System Maintenance
Maintaining a tubeless setup is simple if you follow a few good habits:
- Refill sealant every 2–3 months – it dries out and loses effectiveness.
- Check tyre pressure regularly – ideally before every ride.
- Monitor tyre wear – timely replacement ensures safety.
💡For larger punctures, you can temporarily insert a standard inner tube to get home.
It’s handy to carry one of our new TPU tubes just in case.
Why Choose RUBENA TYRES?
RUBENA TYRES constantly evolves and innovates to bring cyclists the best possible technology.
What You Get:
⚙️ Optimized tread design – built for a wide range of terrains.
⚡ Versatility – suitable for e-bikes and gravel bikes.
🧩 Easy installation – TRL construction fits most standard rims.
🌿 Sustainable production – local manufacturing, smaller ecological footprint.
Thanks to ongoing development and testing, including in Czech riding conditions — RUBENA TYRES has become synonymous with reliability and excellent value for money.
Personal Experience
When I switched to a tubeless setup with Rubena SCYLLA tyres, the difference was immediately noticeable.
Riding over roots and rocks felt smoother, I could safely lower the pressure without worrying about pinch flats, and the sealant sealed a small puncture within seconds.
Since then, I carry a tube only as a backup — just for peace of mind.
Where to Start
Begin by choosing the right tyre.
At rubena-tyres.com you’ll find a clear overview of models for MTB, gravel, and road bikes. All with precise tubeless compatibility details.
In Conclusion
Switching to a tubeless system with RUBENA TYRES is an investment in a smoother, safer, and more efficient ride.
Whether you’re a weekend rider or a racer, tubeless tyres will open up new possibilities, without compromise.